Brand Name: Geprc
Model: SPAN F405 HD Stack
Item Name: F4 Flight Controller & 50A BL_32 4in1 ESC Stack
Mounting Hole: 30.5×30.5mm
F405 Flight Controller ( Click Here to buy Separate Replace FC)
DJI FPV Air Unit Supported. ( Cable connected directly)
BlackBox: 16Mb onboard Flash
Type-C USB interface
OSD: BetaFlight OSD w/ AT7456E chip
BEC Output: 5V & 9V BEC
Integrated LC Filter
Firmware target: GEPRCF405
Size: 36x36mm board, φ4mm with Grommets φ3mm
Power input: 3-6S LiPo
Support Frsky XM/XM+/R-XSR; DSM/DSMX; FlySky Receiver; TBS Receiver; Fubata Receiver, AC900 Receiver
50A BL_32 3-6S 4in1 ESC ( Click Here to buy Separate Replace FC)
Input Voltage: 3-6S Lipo
MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A
Burst Current: 55A (5S)
Current sensor: YES
Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot
Firmware Version: GEPRC-BL32-4IN1
– It is a plug-and-play flight controller with F405 chip and a tower flight system with BL_32 50A 4in1 32bit electrical modulation.
– It integrates 16Mb black box, MPU6000 gyroscope and barometer for a more delicate hand experience.
– Supports direct insertion into DJI Digital FPV System, which can avoid the trouble of welding.
– Upgrade the USB interface of Type-C, greatly improve the life of the socket and reduce the risk of bad contact.
– Supports all kinds of receivers, including Sbus,PPM,CRSF,DSMX,iBus, DUMD and so on.
1x GEP-F405-HD Flight Controller
1x GEPRC G50A ESC
1x 35V 470uf Capacitor
4x Silicon grommets M4 to M3
4x M3*22mm Screw
4x M3*30mm Screw
1x XT60 Power Cable
1x ESC Cable
1x Cable for Connecting to DJI Module